Dietsmann is recruiting for a new contract in Nigeria.

Instrumentation Engineer
Location: Nigeria

Job Description
Dietsmann is recruiting for Nigeria a Instrumentation Engineer.
Position: Instrumentation Engineer.
Location: Nigeria.
The candidate will reporte to the Maintenance Manager, is responsible of the technical issue for electrical equipment and for the spare part definition for electrical equipment.

Profile Required
-To perform preventive maintenance checks, calibration, troubleshooting and shut down maintenance activities of various types of Instrumentation and Systems installed in the plant.
-To efficiently reinstate the units or plants by accurate troubleshooting in case of trip to minimize production losses.
-To deal with breakdown emergencies and solve the problem in a safe manner, to bring the plant back to normal operation
-To update the information of activity reports.
-To participate and contribute in development and implementation of corrective actions to improve reliability of Instrumentation and control system by working closely with the operations, other crafts and support personnel.
-To review proposals and specifications for modification and new minor projects and providing recommendations and feedback.
-To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.
-To attend and requests toolbox meetings wherever it is essential and the job is identified to be at a higher risk level
-To observe operation of all equipment during routine activities for abnormalities, and report any defects to relevant Supervisor
-To supervise housekeeping duties on the Job site. and check and maintain tools and test equipment in efficient working condition.
-To raise failure reports.
-The work is done on safety for all.
-Quality of the preventive work.
-Application of preventive maintenance procedure.
-Management of the Instrument teams.
-Report to leader routine spare part needed.
-Trainer qualities.
-Sense of co-ordination and team work.
-Knowledge of oil and gas process.
-Sense of relational.

More Information
CV to be sent in English with level of application.

Coordinator of Maintenance
Location: International

Job Description
Dietsmann is recruiting a coordinator of maintenance.
Coordinator is responsible for the overall conduct on-site maintenance operations assigned under the contract. It supervises the operations related to the Project Manager.
It provides a general control and supervision of staff and subcontractors and is delegated the management to enforce regulations and procedures for security policy and develop a risk prevention.
Position: Coordinator of maintenance. Rotation: 4 weeks / 4 weeks. Contract: Permanent French law. Accommodation / food / transportation: provided by the company.

Profile Required
The licensee shall particularly be in possession of:
• BTS / DUT in an industrial area.
• 5/10 years experience in similar position in the field of petroleum or petrochemical industry.
• Knowledge of use of computer hardware and software, in particular CMMS.
• Specific professional knowledge:
Industrial Gas Turbines, Turbo-expanders, centrifugal compressors, reciprocating and screw; Group emergency generator and fire pumps, centrifugal alternatives, screw, vacuum, hydraulic cranes, Hydraulic, Electric.
• Rigor and method, interpersonal with its employees and contractors.
• Leadership skills to lead a team according to the sites of several technicians seniors and juniors.
• Physical ability to work on offshore installations in the climatic conditions of the site.
• Languages: English, French minimum read and understood.

More Information
CV to be sent in French and English with level of application.

DSC Supervisor
Location: Nigeria

Job Description
Position: Nigeria.
Location: Offshore position.
Rotation: 4 weeks On 4 weeks off – 7 days worked per week

Profile Required
– HND level.
– Bilingual in English (French is a +).
– 10 years of experience.
– Ability to maintain good relations with colleagues and others.
– Physical ability to work on offshore installations in the climatic conditions of the site.
– PLC knowledge: Schneider / Allen Bradley / Solar.
– DCS knowledge: YOKOGAWA.

– Assuring from Validation by COMPANY ICSS Engineer the accurate control, authorisation verification, integrity and follow up of all software and hardware for use in the ICSS and systems on SITE.
– Performs trouble shooting in the ICSS, PLC, etc.
– Assists specialists working under Specific Maintenance Contracts (SMC).
– Maintains an accurate and auditable log of all system faults and inhibits (Short term and long term) under the direction and Control of COMPANY specialist Engineer.
– Reviews and assures that all Software modifications and corrective actions are validated by COMPANY and conform with the functional analysis.

More Information
CV to be sent in English with level of application.

Quality Controller
Location: Nigeria
Division of new work DIETSMANN based in France Salies-Du-Salat makes a large turnover with 300 employees and branches in Gabon, Congo, Nigeria and Angola.
To support the continued growth of its business work in Nigeria, we are looking for an Instrumentation Technician oriented quality control.
Based offshore instrumentation technician will be responsible for the following tasks under the supervision and control of the Superintendent E & I:
• Quality control work E & I made our teams
• Supervise the work of calibration instruments
• Attend our teams during the PrepCom / com
Initial training in electrical / instrumentation, you have a good experience in work in the oil (at least 5 years), you speak English fluently and you have both the skills to perform office duties (quality control) and field (calibration, PreCom / com) so join our team with high added value.
• Offshore accommodation supported by the client
• Rotation: 6W/6W (to be confirmed by the customer), 7d/7d, 12 hours a day
• Expected duration of the mission: approximately 1 year, if possible perspectives conclusive results
• Start Date: June 2012

Instrument Preparator
Location: Nigeria

To support the continued growth of its business work in Nigeria, we are looking for a leading electrical and instrumentation methods. Position: INSTRUMENT PREPARATOR. Country: Nigeria. Rotation: 5W/2W (to be confirmed by the customer) 6j/7j, 10 hours a day. Agreement: 6 months, if possible perspectives conclusive results. Accommodation supported by the client.

You have a good experience in electrical and instrumentation works in oil (at least 5 years), you speak English fluently and you have the organizational skills and discipline necessary for site preparation then join our team with high added value.
Involved in the site preparation, the methods leading electrical and instrumentation will relay the real project manager in the country and on the ground, it should ensure the following tasks:
– Design of survey on site.
– Writing a first schedule phases for onshore / offshore.
– Control of records of tasks performed by the client and writing files missing.
– Make an estimate man / hour.
– Check electrical equipment lists / instrument.
– Preparing for the mooring.
– Write a list of calibration tools.
– Preparation of pre-commissioning sheets with client records.

More Information
CV to be sent in English with level of application.

To apply for any of the above jobs visit;

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s